Gopro hero3 black autoexec.ash commands
t ia2 -ae still_shutter [shutter_idx] : set still_shutter
t ia2 -ae still_iris [iris_idx] : set still_iris
t ia2 -ae flash_psg : set preflash_strength_gain, unit : 1024
t ia2 -ae flash_fbc : set flash_base_calibration, unit : 1024
t ia2 -ae pm [mode] [strange] : set P mode
t ia2 -ae [on|off] : turn on/off AE
t ia2 [OPTION] VALUE...
Supported options:
-3a: AAA function
-fpn: FPN function
-vnc: Vignette function
-exp: exposure module
-dzoom: digital zoom control
-warp: warp control
-rsc: rsc control
-frc: frame rate change
-fisheye: fisheye effect
-eis: DIS/EIS control
-sof: SOF function
-ae: AE function
-awb: AWB function
-adj: ADJ function
-af: AF control
-lens: lens control
-ssh: slow shutter test
-readout: Sensor phase correction
-ca: ca control
-hdr: hdr control
t ia2 -ae set[agc][dgain][shutter][iris][mode] : set exposure value mode 0 : video, mode 1 : still
t ia2 -ae still_exp [iso][shutter_idx][iris_idx] : set still exposure
|
t ia2 -ae still_exp 100 1000 1000
|
open tone_curve file =%s error ёґ]А [in_filename] : input histogram file name.
[out_curve_enable] : 1--> output results tone curve.
µ]А
t ia2 -hdr tone_curve num_level [levels]
[levels] : number of tone curve levels(1~8)
show
t ia2 -hdr [cmd][value] :
mixer : set hdr mixer information
le_A : local_exp curve maganitude
le_B : local_exp curve width(0:wide 1:middle 2:narrow)
shadow : shadow threshold for hdr calculation
tone_curve : tone curve off-line calculation
show : print debug message
t ia2 -hdr tone_curve cal [in_filename] [out_curve_enable] [out_filename]
[out_filename]: when out_curve_enable ==1, the filename for output filename
| |
protune photo
|
t ia2 -3a 1 0 1 1
|
remove noise reduction
|
t ia2 -3a 0
|
superview
|
t ia2 -warp 1
|
remove fisheye
|
t ia2 -fisheye 1 65536 65536 65536 65536 100
t ia2 -warp 0
|
text output
|
sleep 3
t app fp_show 4
sleep 2
t app fp_string 'Hello WOrld'
|
Move to internals of gopro
|
cd d:\
cp autoexec.ash a:\autoexec.ash
|
hdr photo
|
t app appmode photo
sleep 1
t ia2 -3a 0 1 0 1
t app button shutter PR
t ia2 -3a 1 0 1 0
t app button shutter PR
t ia2 -3a 0
t app button shutter PR
|
leds
|
t app led red_front on
t app led red_front off
t app led red_top_bottom on
t app led red_top_bottom off
t app led red_back on
t app led red_back off
|
ND lens?
|
t ia2 -lens nd enable
|
White balance:
•6500k: Cool white fluorescent skylight lighting. This setting is great for indoors and settings with a lot of white light.
•5500k: Daylight or sunlit shooting. This setting is great for daylight while shooting outside.
•3000k: Incandescent or sunrise/sunset lighting. This setting is great for lower-light situations, where you want the camera to pick up detail without the help of a lot of surrounding light.
|
t app protune on
t app white_balance 3000
t app white_balance 5500
t app white_balance 6500
t app white_balance auto
|
protune photo
|
sleep 1
t ia2 -3a 1 0 1 1
|
square hd videp 22 fps
|
t app video_settings 3040x3040 22 170
|
telnet.
Step 1: Unzip the file gopro-browser-card.zip into the root of SD Card.
Step 2 : unmounted SD card from Windows Tray
Step 3 : Removed USB Cable and the Camera switched off automatically.
Step 4 : Start the wifi bacpac by pressing the side wifi button. Blue LED starts to glow.
Step 5 : Press the mode/Start button and the display comes up.
Step 6 : Move to GoPro App Mode.
Step 7 : Connect the PC/Laptop with the GoProWhite(i.e the SSID I had given while firmware upgrade.)
Step 8 : Enable telnet client on Windows 7 and give the below command :
Microsoft Telnet> o 10.5.5.9 8080
Connecting To 10.5.5.9...
Step 9 : It gets struck here infinitely.
|
lu_util exec 'telnetd -l /bin/sh -p 80'
|
Need to know:
| |
-3a [ae][awb][af][adj] :turn on/off ae/awb/af/adj
ae = [0|1], 0:on 1:off AE
awb = [0|1], 0:on 1:off AWB
af = [0|1], 0:on 1:off AF
adj = [0|1], 0:on 1:off ADJ
exif = [0|1], 1:on 0:off Dump 3A info to EXIF
|
t ia2 -3a 1 1 0 1
t ia2 -ca enable
t ia2 -adj ae
t ia2 -ae on
|
t ia2 -exp set [mode][agc][shutter][iris][dgain] : Set specified parameter
mode = [0|1], 0:VIDEO, 1:Video_init
t ia2 -exp debug [en] : Enable/Disable exposure module debug message
en = [0|1], 0:disable, 1:enable
t ia2 -exp lock [en] : Enable/Disable exposure module lock
en = [0|1], 0:disable, 1:enable
t ia2 -exp info : Print exposure parameters
|
t ia2 -exp set 0 0 200 3 0
|
t ia2 -ae set 0 0 200 3 0
| |
t cal [OPTION] VALUE...
Supported options:
-3a: AAA control
-sc: Scene mode control
-de: Digital effect control
-ae: AE info
-me: Manual exposure
-raw: raw capture
-rawenc: raw encode with manual main window width/heigh
-ituner: ituner tool
-mgr: Calibration manager CLI tool
-fpn: FPN tool
-vnc: Vignette tool
-warp: WARP tool
-ca: CA tool
| |
t ia2 -fisheye [en]: enable fisheye effect
en : 1: enable. 0: disable
Usage: t ia2 -fisheye [en] [dum_left] [dum_right] [dum_top] [dum_bottom] [dzoom_step]: enable fisheye effect
en : 1: enable. 0: disable
dum_left : 0 ~ 65536
dum_right : 0 ~ 65536
dum_top : 0 ~ 65536
dum_bottom : 0 ~ 65536
dzoom_step : 0 ~ 484
a:\> drives
4 drives present in system
drive 'A' - NFTL Media
drive 'D' - SD/MMC
drive 'F' - RAMDISK
drive 'Z' - ROMFS
|
Комментариев нет:
Отправить комментарий